Connect A Wireless Client To Your Router; Wps Button - D-Link AC750 User Manual

Section 5 - Connect a Wireless Client

Connect a Wireless Client to your Router

The easiest and most secure way to connect your wireless devices to the router is WPS (Wi-Fi Protected Setup). Most wireless
devices such as wireless adapters, media players, Blu-ray DVD players, wireless printers and cameras will have a WPS button
(or a software utility with WPS) that you can press to connect to the DIR-818LW router. Please refer to your user manual for the
wireless device you want to connect to make sure you understand how to enable WPS. Once you know, follow the steps below:
Step 1 - Press the WPS button on the back of the DIR-818LW for
a minimum of one second. The Power LED on the front
will start to blink.
Step 2 - Within two minutes, press the WPS button on your
wireless client (or launch the software utility and start
the WPS process).
Step 3 - Allow up to one minute to configure. Once the Power LED stops blinking, you should be connected and your wireless
connection will be secure with WPA2.
D-Link DIR-818LW User Manual

WPS Button

WPS Button
171