Manual Wireless Settings; N/G (2.4Ghz) - D-Link AC750 User Manual

Section 3 - Configuration
Enable Wireless: Check the box to Enable the wireless function.
New Schedule:
Select the time frame that you would like your wireless network enabled. The schedule
may be set to Always. Schedules you create will be available in the drop-down menu.
Click New Schedule to create a schedule.
Wireless Network
Service Set Identifier (SSID) is the name of your wireless network. Create a name for your
Name:
wireless network using up to 32 characters. The SSID is case-sensitive.
802.11 Mode:
Select one of the following:
802.11b Only - Select only if all of your wireless clients are 802.11b.
802.11g Only - Select only if all of your wireless clients are 802.11g.
802.11n Only - Select only if all of your wireless clients are 802.11n.
Mixed 802.11g and 802.11b - Select if you are using both 802.11g and 802.11b
wireless clients.
Mixed 802.11n and 802.11g - Select if you are using both 802.11n and 802.11g
wireless clients.
Mixed 802.11n, 802.11g, and 802.11b - Select if you are using a mix of 802.11n,
802.11g, and 802.11b wireless clients.
Enable Auto Channel Check the box to Enable Auto Channel Scan. This will allow the DIR-818LW to choose
Scan:
the channel with the least amount of interference.
Wireless Channel:
Indicates the channel setting for the DIR-818LW. The Channel can be changed to fit
the channel setting for an existing wireless network or to customize the wireless network. When you check Enable Auto Channel Scan, this option will be
greyed out.
Transmission Rate: Best (automatic) is selected by default. However, you can select a channel from the drop-down menu.
Select one of the following:
Channel Width:
20/40MHz(Auto) - Select if you are using both 802.11n and non-802.11n wireless clients.
20MHz - Select if you are not using any 802.11n wireless clients.
Select Invisible if you do not want the SSID of your wireless network broadcasted by the DIR-818LW. If Invisible is selected, the SSID of the DIR-818LW will
Visibility Status:
not be seen by Site Survey utilities so your wireless clients will have to know the SSID of your DIR-818LW in order to connect to it.
Refer to "Wireless Security" on page 44
Security Mode:
D-Link DIR-818LW User Manual

Manual Wireless Settings

802.11n/g (2.4GHz)

for more information regarding wireless security.
42