Table of Contents
Advertisement
16.2 DE FACTO
16.2.1 Call repeat restriction result codes
BLACKLISTED and DELAYED. Refer to dialling command D and GSM 02.07 Annex A. This
mechanism is mandatory.
16.3 GSM 07.07
16.3.1 +CSSI Intermediate supplementary service notification
Format
+CSSI: <code1>[,<index>]
07.07 section 7.2. This is the first intermediate result code after dial command D. Supported
<code1>s depend on the supplementary services implemented in a product.
16.3.2 +COLP Connected line identification report
Format
+COLP: <number>,<type>[,<subaddr>,<satype>[,<alpha>]]
07.07 section 7.8. This intermediate result code is given after a (possible) +CSSI result code.
Subaddress and alpha are not supported by the Nokia D211.
16.3.3 +CR Data service report
Format
Description
given when +CR=1 and data call established; informs about the type of data call being
+CR: <type>
established
07.07 section 6.9. This intermediate result code is given after a (possible) +COLP result code
during a MO data call setup. During a MT data call setup this is the first intermediate result
code. Note that this result code shall replace the CARRIER result code (when X5 is set).
16.3.4 +CRING Distinctive ring
Format
Description
given when +CRC=1 and incoming MT call (no active or held calls in
+CRING: <type>
ME)
07.07 section 6.11. Note that this replaces the V.25ter RING result code.
Description
given when +CSSN=1 and some supplementary service notification is given
by network during MO call establishment
Description
given when +COLP=1 and number received
from network when MO call established
100/113
Advertisement
Table of Contents
