JVC 0302MNV*ID*JVE Instructions Manual page 33

Perfect Connections
This is an example of recommended connection if your
TV has two 21-pin AV input (SCART) connectors.
Connect the decoder to the satellite receiver's connector
if you have a decoder, L-1 IN/OUT connector to TV's
connector, and L-2 IN/DECODER connector to the
satellite receiver's connector. Then connect the satellite
receiver and TV.
Satellite receiver
Decoder
Back of recorder
Mains outlet
Outdoor unit
Aerial
Satellite cable
NOTES:
Set "L-2 SELECT" to "A/V" (
To record a programme via the satellite receiver, select L-2
mode by pressing AUX (number key "0") and/or PR so that
"L-2" appears on the front display panel.
To receive a scrambled broadcast, descramble the signal with
the satellite receiver.
For details, refer to the instruction manual of the satellite
receiver and decoder.
21-pin SCART
connector
TV aerial cable
ANT. IN
RF OUT
EN
pg. 31).
Aerial
connector
Back of TV
33