Table of Contents
Advertisement
46
EN
Clock Set
Turn on the TV and select the video channel (or
AV mode).
Just Clock
The Just Clock function provides accurate time keeping
through automatic adjustments at regular intervals, by
reading data from a PDC signal.
The Just Clock option can be set "ON" or "OFF" at the Clock
Set screen (the default setting is "OFF"). Press OK until the
Just Clock setting begins blinking, then press
the setting.
IMPORTANT: If you turn off Just Clock, the accuracy of your
recorder's built-in clock may be reduced, which could
adversely effect timer recording. We recommend you to keep
Just Clock on. In cases where the clock setting data from a
PDC signal is incorrect, however, you are advised to keep
Just Clock set to "OFF".
IMPORTANT
If you performed Auto Set Up (
Set (
the recorder's built-in clock is also set automatically.
Perform the following steps only if —
—Auto Clock Set has not been performed correctly by Auto
Set Up or Auto Channel Set.
OR
—the recorder's memory backup has expired.
OR
—you want to change Just Clock setting (
the left column).
A
Press
B
Press MENU.
C
Press
SET", then press OK or
D
Press
SET", then press OK or
NOTE:
When you have selected MAGYARORSZÁG, C ESKÁ REPUBLIKA,
POLSKA or OTHER EASTERN EUROPE for the country setting
(
and 7 on page 47.
to change
rt
SUBSIDIARY SETTINGS (cont.)
pg. 40), without ever having set the clock previously,
Turn on the recorder.
.
1
Access the Main Menu screen.
Access the Initial Set screen.
to move the highlight bar (pointer) to "INITIAL
rt
.
e
Access the Clock Set screen.
to move the highlight bar (pointer) to "CLOCK
rt
. The Clock Set screen appears.
e
pg. 10, 13), you cannot use Just Clock function. Skip steps 6
pg. 10) or Auto Channel
"Just Clock" in
Advertisement
Table of Contents
