Recording; Basic Recording - JVC 0701MNV*ID*PJ Instructions Manual

RECORDING

Basic
Recording
Turn on the TV and select the VIDEO channel (or AV mode).
RECORD
Accidental erasure prevention
To prevent accidental recording on a recorded cassette,
remove its safety tab. To record on it later, cover the hole
with adhesive tape.
NUMBER
PR +/–
SP/LP/EP
PAUSE
Record safety tab
TV signals being received by the recorder's built-in tuner can be
recorded onto a video tape. You can "capture" a TV programme
using your video recorder.
S-VHS recording is possible only for PAL recordings made in the
SP, LP or EP mode, or NTSC recordings made in the SP mode.
S-VHS ET recording is possible only for PAL recordings made in
the SP mode, or NTSC recordings made in the SP mode.
LOAD A CASSETTE
1
Insert a cassette with the record safety tab intact.
The recorder power comes on automatically.
The recorder checks the tape information for
Programme Navigation. For details, refer to "Naviga-
tion " ( pg. 38).
Select the appropriate colour system (
CHOOSE A PROGRAMME
2
Press PR +/– or the NUMBER keys. Or push the JOG
dial and turn it to the left or right to select the channel
you wish to record.
SET TAPE SPEED
3
Press SP/LP/EP (
the recorder display panel to confirm the selected tape
speed.
START RECORDING
4
Press and hold RECORD and PLAY on the remote
control, or press RECORD on the recorder.
B.E.S.T. takes place at the beginning of each first
SP and first LP (or EP) recording after inserting the
cassette ( pg. 24).
PAUSE/RESUME
RECORDING
5
Press PAUSE. Press PLAY to resume recording.
STOP RECORDING
6
Press STOP on the remote control or STOP/EJECT on
the recorder. Then press STOP/EJECT to remove the
cassette.
NOTE:
When recording in NTSC, if EP is selected, recording will
always be done in the VHS mode even if an S-VHS cassette is
used.
Recording Resume
Function
If there is a power outage during recording (or Instant Timer
Recording or timer recording), the recording will resume
automatically when power is restored to the recorder unless
the recorder's memory backup has expired.
EN
pg. 52).
). Check the SP/LP/EP indicator on
19