S-Video Connection - JVC 0701MNV*ID*PJ Instructions Manual

S-VIDEO Connection

Back of TV
AUDIO IN
connectors
Aerial
terminal
Mains Power
Cord
Back of Recorder
To Connect to A TV With S-VIDEO/AUDIO IN Connectors . . .
CONNECT RECORDER TO
TV
1
a– Connect the aerial, recorder and TV as per "RF
CONNECTION" (
b– Connect the recorder's S VIDEO OUT connector to
the TV's S-VIDEO IN connector.
c– Connect the recorder's AUDIO OUT connectors to
the TV's AUDIO IN connectors.
CONNECT RECORDER TO
MAINS
2
Plug the end of the mains power cord into a mains
outlet.
ATTENTION
If you have finished all the necessary connections, go to "Video Channel Set" on page 6, then perform Auto Set Up on page 8; do
NOT press the button on the recorder/remote control to turn on the recorder's power before you start Auto Set Up.
S-VIDEO IN
connector
S-Video cable (provided)
Mains outlet
pg. 4).
Audio cable (not provided)
S VIDEO OUT
RF Cable (provided)
NOTES:
You can obtain high-quality S-VHS pictures.
If your television is not stereo-capable, use the recorder's
AUDIO OUT connectors to connect to an audio amplifier for
Hi-Fi stereo sound reproduction. (
To operate the recorder with your TV using the S-VIDEO
connection, set your TV to the VIDEO (or AV mode).
For switching the TV's mode, refer to the instruction manual
of your television.
EN
Aerial or Cable
AUDIO OUT
ANT. IN
(MONO)
RF OUT
pg. 46)
5