Express Timer Programming - JVC 0701MNV*ID*PJ Instructions Manual

30
EN
Express Timer
Programming
Remember, the clock must be set before you can
programme the timer (
Before performing the following steps:
Insert a cassette with the safety tab in place. The recorder
will come on automatically.
Turn on the TV and select the VIDEO channel (or AV mode).
Select the appropriate colour system (
START+/–
PROG
pg. 12).
pg. 52).
PR +/–
TIMER RECORDING (cont.)
ACCESS G-CODE SCREEN
1
Press PROG.
ACCESS PROGRAMME
SCREEN
2
Press START +/–. (If you're
just starting out, "P1"
appears.)
ENTER PROGRAMME
START TIME
3
Press START +/– to enter
the time you want
recording to start.
Press and hold START
+/– to move in 30-
minute increments, or
press and release
repeatedly to move 1
minute at a time.
ENTER PROGRAMME STOP
TIME
4
Press STOP +/– to enter the time you want recording to
stop.
Press and hold STOP +/– to move in 30-minute
increments, or press and release repeatedly to move 1
minute at a time.
ENTER PROGRAMME DATE
5
Press DATE +/–. (The current date appears on screen.
The date you enter appears in its place.)
ENTER CHANNEL
POSITION
6
Press PR +/–.
– P1 –
START STOP
=
–:– – –:– –
SP
DATE TV PROG
– –.– – – –
[+/–] =
[1]: TITLE
[PROG] : EXIT
– P1 –
START STOP
=
21:00 –:– –
SP
DATE TV PROG
– –.– – – –
[+/–] =
[1]: TITLE
[PROG] : EXIT
– P1 –
START STOP
=
21:00 22:00
SP
DATE TV PROG
25.12 1
[+/–] =
[1]: TITLE
[PROG] : EXIT