2.7 Other Cards
[Notes]
• Two extensions are available for the OHCA function with one OHCA card. See Page 156.
• The OHCA function for APT is only provided with the following APT: KX-T7130.
Connection to the PLC card (KX-T96172)
OHCA card
1.
Make sure that the extensions which use OHCA function have OHCA cards.
2.
Insert the connector (plug) on the OHCA card into the connector (jack) on the PLC card.
3.
Install the PLC card to a free slot. Please refer to Section "2.4.2 PLC Card (KX-T96172)."
[Notes]
• Two extensions are available for the OHCA function with one OHCA card. See Page 156.
• The OHCA function for APT is only provided with the following APT: KX-T7130.
154
PLC card
9-pin connector
(plug)
5-pin connector
(plug)
4-pin connector
(plug)
9-pin connector
(jack)
5-pin connector
(jack)
4-pin connector
(jack)
Installation