Speed Dialing; Personal Speed Dial - Panasonic DBS 576 HD Technical Manual

Chapter 7. SLT Features
Considerations
• Be sure all phones that should NOT be allowed to monitor have a COS that restricts monitoring.
• If the monitored extension is placed on-hook while Room Monitoring is activated, the
monitoring extension will hear a fast busy tone.
• If the monitoring extension goes on-hook while Room Monitoring is activated, the monitored
extension will remain in the monitored mode, and can be accessed by any other extension
allowed to access the room monitoring mode.
• A room cannot be monitored from more than one extension at a time. If an attempt is made to
monitor an extension while the extension is being monitored, the user will hear a fast busy tone.
• ISDN (s-point) extensions cannot access the Room Monitor feature in either the monitor or
monitored modes.
• A monitoring extension cannot forward a call on hold to a monitored extension.
• A monitored extension cannot receive a transferred call.
• If DND is enabled on either the monitoring or monitored extension, DND status is displayed on
the calling extension's telephone.
• If the monitoring or monitored extension has an absence message set, the absence message will
be displayed on the calling extension's telephone.

Speed Dialing

Description
The System supports the following speed dial features:
• Personal Speed Dial (PSD)
• System Speed Dial (SSD)
• Speed Dial Linking
• Speed Dial Name Assignment

Personal Speed Dial

You can store frequently called numbers using the PSD feature. Up to 20 PSD numbers can be stored
in PSD bins numbered 80-99.
Operation
To assign PSD numbers:
1. Lift the handset or press the ON/OFF key.
2. Enter the Speed Dial Set/Clear code (default = 710).
3. Enter the PSD bin number (80-99).
4. Dial the phone number.
5. Press the HOLD key.
6. Replace the handset or press the ON/OFF key.
6-42
Action
DBS 576HD (USA) issued September 2001
Section 700 - Operation
Result
Intercom dial tone
576-50-700