Speed Dialing; Personal Speed Dial; System Speed Dial; Speed Dial Linking - Panasonic DBS 576 HD Technical Manual

Section 700 - Operation
Considerations
• Be sure all phones that should NOT be allowed to monitor have a COS that restricts monitoring.
• If the monitored extension is placed on-hook while Room Monitoring is activated, the
monitoring extension will hear a fast busy tone.
• If the monitoring extension goes on-hook while Room Monitoring is activated, the monitored
extension will remain in the monitored mode, and can be accessed by any other extension
allowed to access the room monitoring mode.
• A room cannot be monitored from more than one extension at a time. If an attempt is made to
monitor an extension while the extension is being monitored, the user will hear a fast busy tone.
• ISDN (s-point) extensions cannot access the Room Monitor feature in either the monitor or
monitored modes.
• A monitoring extension cannot forward a call on hold to a monitored extension.
• A monitored extension cannot receive a transferred call.

Speed Dialing

Description
The System supports the following speed dial features:
• Personal Speed Dial (PSD)
• System Speed Dial (SSD)
•

Speed Dial Linking

• Speed Dial Name Assignment

Personal Speed Dial

You can store frequently called numbers using the PSD feature. Up to 20 PSD numbers can be stored
in PSD bins numbered 80-99.
Operation
To assign PSD numbers:
1. Lift the handset.
2. Enter the Speed Dial Set/Clear code (default = 710).
3. Enter the PSD bin number (80-99).
4. Dial the number.
5. Hookflash.
6. Replace the handset.
576-50-700
Action
DBS 576HD (USA) issued September 2001
Chapter 7. SLT Features
Result
Intercom dial tone
7-35