Panasonic DBS 576 HD Technical Manual page 72

Chapter 7. SLT Features
Figure 3-1. Output data format
Format #1
T MM/DD HH:MM:SS HH:MM:SS NNNN TTTT dddddddddddddddddddddddd aaaaaaaaaa vvvvv
1 2
Format #2
T MM/DD HH:MM:SS HH:MM:SS NNNN TTTT dddddddddddddddddddddddd aaaaaaaaaa vvvv
1 2
dddddddddddd cccccccccccc
9 10
Format #3
T MM/DD HH:MM:SS HH:MM:SS NNNN TTTT dddddddddddddddddddddddd aaaaaaaaaa vvvv
1 2
dddddddddddddddd bb MM:SS
9
13
Condition Code: (I: Incoming call / D: DID.DDI incoming call / h: Hold incoming call / N: Network
1
incoming call / S:DISA incoming call / t: Transfer incoming call / A: Abandoned Call / O: Outgoing
call [Non LCR] / F: Call forward outside call / H: Hold outgoing call / L: LCR outgoing call / T:
Transfer outgoing call / W: Closed Numbering call)
2 Call Start Time (MM=01 to 12 / DD=01 to 31 / HH=00 to 23 / MM=00 to 59 / SS=00 to 59)
3 Call Duration Time (HH=00 to 23 / MM=00 to 59 / SS=00 to 59)
Condition Code is I, D, N, S, or A.
4 CO User No. (Extension line No.: 0 to 9999 / CO line No.: C001 to C576)
5
CO line No. (CO line No.: 001 to 576 / When CO line is disconnected while the call is on hold: *001
to *576)
6 Dialed No. (24 digits max. including 0-9, *, # Cannot display Flash or Pause. If a number is hidden, *
will appear instead of digits. * will stay with the call even if the call is transferred. For Format 2, an I
Proceeds the digits if it is an incoming call.)
7 Accounting Code (10 digits max.)/Verified Account Code (Verified Account Code table number
V001 to V500)
8 DISA Security Code ID (DISA ID Code table number D001-D016)
9 Caller Data (Formats
ISDN Charge Data (Format #2 only - originator number applies to ISDN only) - Not used (Format # 2
10
only) Future Use
Incoming Ringing Time
11
3-54
3 4 5
3 4 5
MM:SS
H
11 12
3 4 5
H
11 12
#2 and #3 only) (Format #2: Max 12 digits, Format #3: Max 16 digits)
(Formats #2 and #3
DBS 576HD (USA) issued September 2001
6
6
6
Note: Only displayed when
only) (MM=00 to 59 / SS=00 to 59)
Section 700 - Operation
H
7 8 12
7 8
7 8
576-50-700