Adding Vpn Sites By Using Ip40 Satellite X; To Add Or Edit Vpn Sites By Using Ip40 Satellite X - Nokia IP40 User Manual

13
Working with VPNs
Download Configuration
If you chose Download Configuration in Adding VPN sites by using IP40 Tele 8, a dialog box
appears.
1. Click Next, the Network Topology will be downloaded from the specified VPN gateway.
The VPN Login page appears.
2. Follow steps 9 to 13 in Specify Configuration section to proceed.
The VPN Sites page updates with the added VPN sites. If you edited a VPN site, the
modifications are reflected in the VPN Sites list.
Route All Traffic
If you chose Route All Traffic in Adding VPN sites by using the IP40 Tele 8:
1. The VPN Network Configuration dialog box appears with the note, "Only one VPN Profile
can be configured as "Route All Traffic".
2. Check either Download Configuration or Specify Configuration depending on how you
want to obtain the VPN network configuration
3. Follow steps 9 to 13 in Specify Configuration section to proceed.

Adding VPN Sites by Using IP40 Satellite X

You can define each VPN site according to the function you want IP40 Satellite X to perform
when connecting to the site:
VPN Client — Define the VPN site as a Remote Access VPN site using the procedure below.
VPN Gateway — Do the following:
!
!

To add or edit VPN sites by using IP40 Satellite X

1. In the Navigation Bar, click VPN.
The VPN Server page appears.
2. In the VPN submenu, click VPN Sites.
The VPN Sites page appears with a list of VPN sites.
3. Do either of the following:
!
!
The IP40 VPN Site Wizard opens, with the Welcome to the VPN Site Wizard dialog box
displayed.
142
Define the second VPN site as a site-to-site VPN gateway by using the procedure below.
Define the first VPN site as a site-to-site VPN gateway.
To add a VPN site, click New Site.
To edit a VPN site, click Edit in the desired VPN site's row.
Nokia IP40 User Guide