Hold Recall Time - Panasonic KX-TA308 Installation Manual

4.2 System Programming
[200]

Hold Recall Time

Assigns the length of the hold recall timer. Hold recall (a ring tone or an alarm tone) is
heard when the timer expires. If hold recall is not required, select "Disable".
2
Default
• Feature References
Section 3, Features
Call Park, Hold
[201] Transfer Recall Time
Assigns the length of the transfer recall timer. If a transferred call is not answered within the
programmed time, the call will be returned to the original caller.
2
Default
• Feature Reference
Section 3, Features
Call Transfer – to Extension
[202] Call Forwarding Start Time
Assigns time for the Call Forwarding – No Answer feature. If a call is not answered within
the programmed time, the call will be forwarded to the destination.
2
Default
• Feature Reference
Section 3, Features
Call Forwarding
0 0
NEXT
30 seconds
0 1
NEXT
30 seconds
0 2
NEXT
(5/10/15/20
15 seconds delay
SELECT STORE
(30 sec/
1/1.5/2/3/4/5/6 min/
Disable)
STORE
SELECT
(15/30 sec/
1/2 min)
STORE
SELECT
sec delay)
[200]-[202]
END
END
END
System Programming
4-27