Outside (Co) Line Connection Assignment - Panasonic KX-TA308 Installation Manual

[400]-[401]
[400]

Outside (CO) Line Connection Assignment

Assigns which outside (CO) line(s) is connected to the system or not.
4
* Outside (CO) line number: 1 through 6 /
Default
• Feature Reference
Section 3, Features
Outside Calling
[401] Dial Mode
Selects the dialing mode, DTMF, Pulse or C. BLK (Call Blocking), for each outside (CO) line.
DTMF: The dialing signals from an extension, either Tone or Pulse, are converted to
Pulse : The dialing signals from an extension, either Tone or Pulse, are converted to
C. BLK: If your Central Office can receive both DTMF and Pulse signals but the user are
4
* Outside (CO) line number: 1 through 6 /
Default
• Feature Reference
Section 3, Features
Pulse to Tone Conversion
4-42
System Programming
0 0
NEXT
All outside (CO) lines – Connect
Tone and transmitted to the Central Office. If the system is connected directly to
the Central Office or installed behind a host PBX, which receives both Tone and
Pulse, select this mode.
Pulse and transmitted to the Central Office.
contracted for Pulse, select this mode. When dialing with a touch tone
telephone, only Pulse signals are sent to the Central Office.
0 1
NEXT
All outside (CO) lines – DTMF Mode
4.2
or
NEXT
outside line no.*
SELECT
(1···6/ )
(Connect/
Not connect)
SELECT
(All outside lines)
or
NEXT
outside line no.*
SELECT
(1···6/ )
(DTMF/Pulse/
C.BLK Mode)
SELECT
(All outside lines)
System Programming
PREV
To continue
STORE
To continue
PREV
To continue
STORE
To continue
END
END