Fax Tone Detection - Panasonic KX-TA308 Installation Manual

4.2 System Programming

[514] FAX Tone Detection*

Sets the number of times the FAX (CNG) tone must be detected while the DISA outgoing
message is sent before the system recognizes the incoming signal as facsimile data.
5
Default
!
• The extension which can receive facsimile data must be assigned in program [503] "FAX
!
Connection"
• Feature Reference
Section 3, Features
Direct Inward System Access (DISA)
[515] Intercept Time for Internal DISA
Assigns the length of time the system keeps detecting DTMF signals after a call is received
at the internal DISA. If the system does not receive DTMF signals within the programmed
time, the call will be intercepted or disconnected according to program [510] "DISA No Dial
Mode".
5
Default
!
!
• A cyclic tone and FAX (CNG) tone cannot be detected by the internal DISA.
• Feature Reference
Section 3, Features
Direct Inward System Access (DISA)
* 1 : Required only when the optional OGM/FAX Detection
Card is installed.
1
1
4
NEXT
(1 Time/2 Times)
1 Time
5
1
NEXT
3 seconds
STORE
SELECT
SELECT
STORE
(3/6/9 sec)
[514]-[515]
END
END
System Programming
4-63