Speaker System Connection; Wireless Tx; Wireless Rx; Changing A Channel Of Wireless Tx And Wireless Rx - LG LH-W250SC Owner's Manual

Connections (Continued)

Speaker System Connection

ote
If there is a strong electromagnetic wave product
nearby, an interference may be occured.
(Ex : Micro wave oven)

Wireless TX

LED indicator of Wireless TX
* LED indicator - "BLUE"
The main set is turned on, the Wireless TX is connect-
ed the SOUND SIGNAL connector and rear (right, left)
speaker connectors with the sound signal cable and is
connected the DC IN connector at the Wireless TX
and the Wireless TX (DC 7V OUT) connector at the
main set with the DC power cable.
* LED indicator - "OFF (No display)"
The main set is turned off.
SIGNAL ID./CH. DC IN

Wireless RX

LED indicator of Wireless RX
* LED indicator - "BLUE"
The Wireless TX is receiving a signal of Wireless TX.
* LED indicator - "RED"
The Wireless RX is in standby mode.
LED indicator
Displays the operated
status.
DC IN connector
ID/CHNNEL (ID./CH.)
button
SOUND SIGNAL
connector
LED indicator
Displays the operated
status.
ID. button (or ID./CH. button)
STANDBY/ON button
(If you press this button, Power
is off and If you press this
button once more, it is in
standby mode.)
Wireless speaker connector
Power cord
Changing a channel of Wireless
TX and Wireless RX
If there is a similar wireless product nearby, interference
may occur. In this case, change to other channel using
ID/CHNNEL (ID./CH.) button of Wireless TX.
Press the ID/CHNNEL (ID./CH.) button for less than
about 3 seconds.
ote
The Wireless RX may not receiced the changed channel of
Wireless TX. In this case press the ID button (or ID./CH button)
of Wireless RX for less than about 3 seconds.
- The Wireless RX searches the changed channel.
Setting a ID of Wireless TX and
Wireless RX
When the unit is manufactured, ID are already set.
If an interference is occured or you use a new Wireless
RX, set the new ID.
1. Set the distance between the Wireless TX and the
Wireless RX within 50cm.
2. Turn the Wireless TX and Wireless RX on.
3. Press the ID/CHNNEL (ID./CH.) button of Wireless
TX and ID button of Wireless RX at the same time
for more than about 3 seconds.
otes
If there is a strong electromagnetic wave product nearby, an
interference may be occured.
Do not operate a portable transmitter (such as a wireless
network device) near this product.
9