2. Install the cage nuts and mounting rails to the rack.
a. Insert one cage nut into the hole you marked using the rack template on the
rear of the rack (1).
b. Hook the rail-mounting bracket tabs into the appropriate holes on the rear of
the rack, and insert one M-6 screw (2).
c. Align the front mounting rail holes to the rack, and insert two M-6
screws (3).
d. Repeat the steps above to install the other mounting rail.
2
Figure 2-2: Installing the cage nuts and mounting rails
to the rack
HP 1U Integrated Keyboard Drawer User Guide
1
Installing the 1U Integrated Keyboard Drawer
3
2-3