Keyboard Programming
The 1U Integrated Keyboard Drawer supports up to seven keystrokes for assigning
up to nine devices to hot keys.
To program a hot key:
1. Press the Programming Wizard key.
2. Press the Print Scrn key.
3. Identify the device.
Table 3-1: Hot Key Programming Examples
Example
1
2
3
4
4. Press the Enter key.
5. To complete setup, select the hot key that has been assigned.
To program all four examples listed in Table 3-1 would require that each example be
programmed separately.
NOTE: Assignment of a device is not permanent; it can be changed. To reassign a device,
repeat the above steps.
HP 1U Integrated Keyboard Drawer User Guide
To select the first server on Remote Switch 1, type 1-1.
To select the eighth server on Remote Switch 1, type 1-8.
To select the fourth server on Remote Switch 2, type 2-4.
To select the standalone server on port 8 of the Master Switch,
type 8.
Operating the 1U Integrated Keyboard Drawer
3-3