HP 1U User Manual page 19

Installing the 1U Integrated Keyboard Drawer
3. Attach the cable management arm brace to each mounting rail, making sure the
cable access hole faces the right side of the rack.
NOTE: The cable access hole must be positioned on the right side of the rack to allow
appropriate routing of the cables.
a. Flex the mounting rail out slightly to allow the cable management arm brace
to be inserted.
b. Align the screw holes on the cable management arm brace with the screw
holes on the mounting rails (1).
c. Insert one 6-32 screw on each side (2).
d. Tighten the screws (3).
3
Figure 2-3: Attaching the cable management arm brace
to the mounting rail
2-4
2
1
HP 1U Integrated Keyboard Drawer User Guide