Siemens HiPath 4000 User Manual page 73

Step by Step
> <
BASIC SERVICE
> <
Feature settings
> <
FORWARD
> <
Activate
> <
Deactivate
Activating and deactivating forwarding by means
of a switch
If a forwarding destination has been programmed for
fixed forwarding, you can use the switch to activate and
deactivate the forwarding facility. If variable forwarding
is activated, it can only be deactivated with the switch.
u
Call the system menu.
[
Select and confirm the basic setting.
[
Select the menu item and confirm.
[
Select the menu item and confirm.
[
Select the menu item and confirm. The call forwarding
function is activated.
[
Select the menu item and confirm. Call forwarding is
deactivated. This deletes any destination number pro-
grammed for variable forwarding.
Automatic call forwarding
Forwarding of internal and external calls in the system
can be configured and activated for your line by System
Support. Calls can be rerouted:
• unconditionally
• when the line is busy
• when the call is not answered
Unconditional call forwarding should only be used if the
line is for outgoing calls only (for example, in a lift).
If you have set up fixed or variable call forwarding, and
if the manually programmed forwarding destinations
are not obtainable (for example, because they are
busy), then calls are automatically forwarded to the sys-
tem forwarding destinations.
Making calls – enhanced functions
73