Panasonic KT7 Instruction Manual page 13

Input type (character indication) and range
K –200 to 1370 :
–199.9 to 400.0 :
J –200 to 1000 :
R 0 to 1760 :
S 0 to 1760 :
B 0 to 1820 :
E –200 to 800 :
T –199.9 to 400.0 :
N –200 to 1300 :
PL- 0 to 1390 :
C (W/Re5-26) 0 to 2315 :
Pt100 –199.9 to 850.0 :
:
JPt100 –199.9 to 500.0
Pt100 –200 to 850 :
JPt100 –200 to 500 :
4 to 20mA DC –1999 to 9999:
0 to 20mA DC –1999 to 9999:
0 to 1V DC –1999 to 9999:
0 to 5V DC –1999 to 9999:
1 to 5V DC –1999 to 9999:
0 to 10V DC –1999 to 9999:
Press the
the key.
[Auxiliary function setting mode 2]
Input type • Make a selection with
SV
PV Selection
• Default value:
Scaling high limit • Set the value with
PV SV
Set value
Scaling low limit • Set the value with
PV SV
Set value
Decimal point place • Select the value with
SV
PV
Selection • Available for DC current, DC voltage input
PV filter time
constant • Set the value with
PV SV
Set value
OUT high limit • Set the value with
PV SV
• Not available for ON/OFF action
Set value
OUT low limit • Set the value with
PV SV
• Not available for ON/OFF action
Set value
OUT ON/OFF action
• Set the value with
hysteresis
• Available for ON/OFF action
PV SV
Set value
Alarm type • Make a selection with
(1)
SV
PV
Selection
• Default value:
Alarm action • Make a selection with
(2)
Energized/Deenergized • Not available if
SV
PV
Selection
Alarm HOLD function • Make a selection with
(3)
SV
PV • Not available if
Selection
type selection
Alarm hysteresis • Set the value with
(4)
PV SV
• Not available if
Set value
type selection
K –320 to 2500 :
–199.9 to 750.0 :
J –320 to 1800 :
R 0 to 3200 :
S 0 to 3200 :
B 0 to 3300 :
E –320 to 1500 :
T –199.9 to 750.0 :
N –320 to 2300 :
PL- 0 to 2500 :
C(W/Re5-26) 0 to 4200 :
–199.9 to 999.9 :
Pt100
JPt100 –199.9 to 900.0 :
Pt100 –300 to 1500 :
JPt100 –300 to 900 :
key for approx. 3sec while holding down
,
, keys.
, keys.
,
, keys.
, keys.
, keys.
, keys.
,
,
is selected during Alarm
type selection
,
is selected during Alarm
, keys.
is selected during Alarm
Alarm type
High limit alarm: The alarm action is
if the input value reaches the high limit set value. Character indication:
Low limit alarm: The alarm action is
if the input value goes under the low limit set value. Character indication:
High/Low limits alarm: Combines High limit and Low limit alarm actions. When input value
reaches high limit set value or goes under the low limit set value, the alarm is
activated. Character indication:
High/Low limit range alarm: When input value is between the high limit set value and low
limit set value, the alarm is activated. Character indication:
Process alarm: Within the scale range of the controller, alarm action points can be set
at random and if the input reaches the randomly set action point, the alarm is
activated.
Character indication: Process high alarm
Alarm with standby function: When the power to the controller is turned on, even if the input
enters the alarm action range, the alarm is not activated. (If the controller is
allowed to keep running, once the input exceeds the alarm action point, the
standby function will be released.)
Character indication:
High limit alarm with standby
Low limit alarm with standby
High/Low limits alarm with standby :
keys. Alarm action delayed
(5)
PV
Direct/Reverse control
PV
PV
keys.
Setting item not used
PV
Output status selection
when input abnormal
PV
Controller/Converter
PV
Reverts to the PV/SV display.
keys.
keys.
keys.
13
deviation setting from the SV. The alarm is activated
deviation setting to the SV. The alarm is activated
, Process low alarm
:
:
• Set the value with
timer • Not available if
SV
type selection
Set value
• Make a selection with
SV
Selection • Default value:
AT bias • Set the value with
SV
• Available for thermocouple, RTD input
Set value
• Do not set this item even if
SV
on the PV display.
Set value
• Make a selection with
• Available only when input is DC current and DC
SV
Selection voltage with DC current output
• Make a selection with
SV
Selection
• Available for DC current output
, keys.
is selected during Alarm
, keys.
, keys.
is indicated
, keys.
, keys.