Wired Lan - Panasonic TH-80OLFB70U Operating Instructions Manual

Network Settings

Wired LAN

You can make detailed wired LAN settings.
1
Select [Wired LAN] in [Network Settings] menu and press
Wired LAN
Save
DHCP
IP address
Subnet mask
Gateway
2
Set [DHCP].
When [Off] is selected, IP address and other settings can be set manually.
DHCP
(DHCP client function)
IP address
(Display of IP address and setting)
Subnet mask
(Displaying and setting the subnet mask)
Gateway
(Display of gateway address and setting)
If [DHCP] is set to [On], the IP address and other items are not displayed. Check the [Network Status] page for the
current IP address and other items. (See page 20)
3
Select [Save] and press
Save the current network settings.
If message indicating a duplicate IP address is displayed in [Network Status] (see page 20), check the same
IP address is not used within the same network.
•
Before using the DHCP server, make sure the DHCP server is already functioning.
•
For details of IP address, subnet mask, and gateway, ask the network administrator.
•
A wired LAN and wireless LAN cannot be used in the same segment.
■
Default wired LAN settings
The following settings are set before the Display leaves the factory.
DHCP
IP address
Subnet mask
Gateway
1
Off
192.168. 10.100
255.255.255. 0
192.168. 0. 1
2
3
4
On: If a DHCP server exists in the network to which the display
is connected, the IP address will automatically be acquired.
Off: If a DHCP server does not exist in the network to which the
display is connected, additionally set [IP address], [Subnet
mask] and [Gateway].
Enter the IP address if DHCP server is not used.
If not using a DHCP server, enter the subnet mask.
Enter the gateway address if DHCP server is not used.
button.
Off
192.168.10.100
255.255.255.0
192.168.10.1
Select the item and press
IP address
000.192.168.010
1 2 3 All delete
4 5 6
Delete
7 8 9
0 .
Ok Cancel
Delete the current numbers. ([Delete] or [All delete])
Enter numbers and dots using numeric keypad on
the screen.
Select [Ok] and press
To cancel changing the address, select [Cancel]
and press button.
button.
button.
button.
13