Table of Contents
Advertisement
Network Settings
Live mode Cut In
Set this [ON] to allow interrupt of the Live mode by other users while the Live mode is active (sending image) by the
"Wireless Manager". For details, refer to "Wireless Manager" operating manual.
1
Select [Live mode Cut In] in [Network Settings] menu and press
2
Select [On] or [Off].
DIGITAL LINK status
Display the DIGITAL LINK connection environment.
Select "DIGITAL LINK status" in [Network Settings]
menu, and press
LINK status
: Either "No link", "DIGITAL LINK", or "Ethernet" will be displayed.
No link
DIGITAL LINK
Ethernet
HDMI status
: Either "No HDMI", "HDMI ON", or "HDCP ON" will be displayed.
No HDMI
HDMI ON
HDCP ON
Signal quality
: It is the quantifi ed minimum and maximum numbers of errors that have occurred. The display
colors are red, yellow, or green, depending on the number.
The number is represented by yellow or red if the LAN cable is disconnected or the cable is
not shielded. This signal quality shows fi gures between the twisted pair cable transmitter that is
connected and the display.
Signal Quality
-12dB or below
-11 to -8dB
-7dB or above
Digital Interface Box
A switch will be made to the Set up Digital Interface Box menu when "Digital Interface Box" in [Network Settings]
menu is selected and
This function can only be selected when the Digital Interface Box (ET-YFB100G) made by our company is connected
to a LAN terminal and its power is on.
.
: No LAN connection, etc.
: Connected to the DIGITAL LINK device by LAN
: The PC is connected to the DIGITAL LINK terminal of this product and is
LAN connected
: DIGITAL LINK not connected
: DIGITAL LINK connected
: A signal with an HDCP is fl owing with a DIGITAL LINK connection.
is pressed.
DIGITAL LINK status
LINK status
HDMI status
Signal Quality
Display Colors
Green
Yellow
Red
button.
No HDMI
Minimum
Maximum
Reception Status
The reception is normal
Part of the received
data is corrupted
There are reception
diffi culties
No Link
-XX dB
-YY dB
21
Advertisement
Table of Contents
