Connecting With Wired Lan; Computer Operation; Connecting With Wireless Lan - Panasonic TH-80OLFB70U Operating Instructions Manual

Connecting with Wired LAN

To use the network function, make the necessary settings in [Network Settings] and be sure to set LAN to enabled
in [Control I/F Select] and [DIGITAL LINK mode]. (See page 20)

Computer operation

Connection can be made with wired LAN. However, confi rm to your system administrator on network settings
before changing any settings.
1
Turn on the computer.
2
Make the network setting according to your system administrator.
If the Display settings are the default settings (See page 13), the computer can be used with the following
network settings.
IP address
Subnet mask
Gateway

Connecting with Wireless LAN

Computer operation
1
Make the network setting according to your system administrator.
•
If you select [M-DIRECT] for [Wireless LAN] in the [Network Settings] menu, the IP address will
automatically be acquired.
•
If you select default settings of [USER1] - [USER3] for [Wireless LAN] in the [Network Settings] menu (see
page 17), then the computer can be used with the following network settings.
IP address
Subnet mask
Gateway
2
Connect to the wireless network that has the same [SSID] set with the Display.
When you select default settings of [M-DIRECT] for [Wireless LAN] in the [Network Settings] menu, the
SSID is [M-DIRECT + The last 4 digits of the Display ID].
When you select default settings of [USER1] - [USER3] for [Wireless LAN] in the [Network Settings] menu,
the SSID is [Panasonic Display].
•
If you use any wireless utility other than Windows [Wireless Network Connection], follow its operation
procedure for connection.
•
If you use the access point, confi gure the Display and each network setting of the computer following the
instruction of the network administrator.
192.168.10.101
255.255.255.0
192.168.10.1
192.168.11.101
255.255.255.0
192.168.11.1
23