Cleaning The Shuttle Race And Feed Dogs; Oiling The Machine - Kenmore 385.162213 Owner's Manual

Cleaning the Shuttle Race and Feed Dogs
[] Unplug the machine and remove the presser foot and
needte Open the face cover to allow room to remove the
needle plate screw with a screwdriver Remove the needle
plate_) and take out the bobbin
0 Needle plate
Lift up the bobbin holder_)and remove it,
_) Bobbin holder
[] Brush out dust and lint inside the bobbin holder. Clean
the feed dogs (_ and hook race(_ with a lint brush. Wipe
out gently with a soft, dry cloth
_) Feed dogs
Hook race
[] Line up the triangle marks ® and position the bobbin
holder, so that the notch fits next to the stopper® in the
hook race,
® Line up the triangle marks
® The notch fits next to the stopper.
/
[]
Oiling
the Machine
Unplug the machine. Open the face cover and oil the two
points, as shown, at least once a year. One or two drops of
oil is sufficient Remove excess oil, otherwise it may stain the
fabric In case the machine has not been used for a long
period, oil it before sewing. Use quality sewing machine oil.
f
[]
[]
[]
®
/
/
/
J
94