Table of Contents
Advertisement
Console Ports
The Z9000 has two management ports available for system access—a console port and a Universal serial
bus (USB)-B port.
The USB-B ports act exactly the same as the console port. The terminal settings are the same for both
access ports.
Accessing the RJ-45 Console Port (RS-232)
The RS-232/RJ-45 console port is labeled on the upper-right-hand side of the S8410–ON chassis (the
I/O side) (as shown in the following illustration).
NOTE: Before starting this procedure, be sure that you have a terminal emulation program already
installed on your PC.
Figure 11. S4810–ON Serial Console Port Connector
1.
RJ-45 Console Port
The following table lists the console port pinout assignments.
To access the console port, follow these steps.
1.
Install an RJ-45 copper cable into the console port. Use a rollover cable to connect the S4810–ON
console port to a terminal server.
2.
Connect the other end of the cable to the dumb terminal emulator (DTE) server.
Console Ports
7
31
Advertisement
Table of Contents
