Panasonic KX-TDA0490 Getting Started page 43

4.1 Programming the PBX in the Los Angeles Office
Confirm that ports 1 through 8 are in service (INS).
5. a.
From the System Menu, click CO & Incoming
Call.
b.
Click CO Line Settings.
c.
Type the CO Name and assign an unused
Trunk Group Number to be used for all VoIP
gateway trunks.
d.
Click OK.
6. a.
From the System Menu, click System.
b.
Click Numbering Plan.
c.
Click Main.
d.
Click the Features tab.
e.
In the TIE Line Access box, type the dialling
number.
f.
Click OK.
7. a.
From the System Menu, click Private
Network.
b.
Click TIE Table.
c.
In the Own PBX Code box, type 35 (the PBX
code of the local PBX in the network).
d.
In the first unused Leading Number box, type
41 (the PBX code of the remote PBX in the
network).
e.
In the corresponding Trunk Group list, select
the number of the trunk group to be used
when making calls.
f.
Set the number modification pattern, if
necessary.
g.
Click OK.
Getting Started 43