Connecting Wires To Terminals - Kenwood KDC-1032 Instruction Manual

Connecting Wires to Terminals

Rear left output (White)
Rear right output (Red)
Fuse (10A)
Wiring harness
(Accessory1)
Power control/Motor antenna control wire
(Blue/White)
(Blue)
(Brown)
FRONT • L
FRONT • R
REAR • L
REAR • R
Ignition wire (Red)
Battery wire (Yellow)
Ground wire (Black) · (To car chassis)
16
|
English
If no connections are made, do not let the wire come out from the tab.
P.CONT
ANT.
CONT
MUTE
White/Black
White
Gray/Black
Gray
Green/Black
Green
Purple/Black
Purple
Car fuse box
ACC
Front right output (Red)
(KDC-1032 only)
Front left output (White)
(KDC-1032 only)
FM/AM antenna input
Connect either to the power control terminal when
using the optional power amplifier, or to the antenna
control terminal in the vehicle.
Not Used
Do not let the wire come out from the tab.
Not Used
Do not let the wire come out from the tab.
To front left speaker
To front right speaker
To rear left speaker
To rear right speaker
Ignition key
switch
Car fuse box
(Main fuse)
Battery
– +