Speaker Setting; Clock Display; Adjusting Clock - Kenwood KDC-1032 Instruction Manual

Speaker Setting

Fine-tuning so that the System Q value is optimal
when setting the speaker type.
1
Enter Standby
Press the [SRC] button.
Select the "STBY" display.
2
Enter Speaker Setting mode
Press the [VOL] knob.
3
Select the Speaker type
Turn the [VOL] knob.
Each time you turn the knob, the setting
alternates between the settings shown in the
table below.
Speaker type Display
OFF "SP-F"
For 5 & 4 in. speaker "SP-5"
For 6 & 6x9 in. speaker "SP-6"
For the OEM speaker "SP-O"
4
Exit Speaker Setting mode
Press the [VOL] knob.

Clock Display

Press the [CLK] button.
Each time you press the button, the clock display
turns ON and OFF.

Adjusting Clock

1
Enter Standby
Press the [SRC] button.
Select the "STBY" display.
2
Select the clock display
Press the [CLK] button.
3
Enter clock adjustment mode
Press the [CLK] button for at least 2 seconds.
The clock display blinks.
4
Adjust the hours
Push the Control knob towards [FM] or [AM].
Adjust the minutes
Push the Control knob towards [4] or
[¢].
5
Exit clock adjustment mode
Press the [CLK] button.
9
|
English