Digital Setup - Sharp Aquos LC-57D90U Operation Manual

Basic adjustment settings
This setting allows you to set the image of Digital
broadcasting.
You can adjust the settings for Digital image.
Screen Size
Set the format of image of Digital broadcasting.
Press MENU and the MENU screen displays.
Press
./T
to select "REC Picture Size", and
then press ENTER.
Press ......
/~
to select the desired picture size,
and then press ENTER.
Press
~/~
to select "Digital Setup".
Press
./T
to select "Video Setup", and then
press ENTER.
Press
./T
to select "Screen Size", and then
press ENTER.
4:3TV
16:9TV
Bars may appear on the top and
bottom with some programs
Displays in full screen
Press MENU to exit.
Manual
Auto
Press ......
/~
to select "Manual" or "Auto".
With 480i/480p/720p broadcasts
you can change the screen size to
the size of your choice.
All broadcasts will be converted
and displayed in the 1080i format.
Press MENU to exit.
You can output digital audio to an AV amplifier or similar
device whose DIGITAL AUDIO INPUT terminal is
connected to the DIGITAL AUDIO OUTPUT terminal
on the TV (see page 37). Please select an audio output
format compatible with the audio format of the program
you are watching and the equipment connected.
Press MENU and the MENU screen displays.
Press ~/~ to select "Digital Setup".
~f:imm
• "Manual" is factory preset value.
REC Picture Size
Select the screen size to record on 16:9 video.
I·
Press
./T
to select "Audio Setup", and then
press ENTER.
Press
./T
to select "PCM" or "Dolby
Digital", and then press ENTER.
1
Press MENU and the MENU screen displays.
3
Press
~/~
to select "Digital Setup".
Press
./T
to select "Video Setup", and then
press ENTER.
PCM
Dolby Digital
The optical output terminal outputs
audio signal in PCM form. If your
digital audio system does not
support Dolby Digital, select
"PCM".
The optical output terminal outputs
audio signal in Dolby Digital form.
It reproduces sound from surround
program of digital.
Press MENU to exit.
@-31