Sharp Aquos LC-57D90U Operation Manual page 60

Useful adjustment settings
Canadian English ratings Canadian French ratings
1
Press MENU and the MENU screen displays.
1
Repeat steps 1 to 5 in Canadian English
ratings.
Press .....
/~
to select "Setup".
2
Press
./T
to select "Can. French Ratings",
and then press ENTER.
Press
./T
to select "Parental CTRL", and
then press ENTER.
• Secret number setting menu displays only
when "Secret No." is set. (See page 54.)
• "V-Chip" and "Status" will not be selectable
from the menu if you do not first configure your
secret number. (See page 54.)
Input the 4-digit secret number by using
0-
9.
Press
./T
to adjust the item to your desired
position. "Ii" indicates the item is blocked.
• The setting automatically enters "Block" for any
ratings below your selection.
• If Status is not set to "On"
I
the configuration
settings will not work. (See page 54.)
Example
Press MENU to exit.
I
• The V-CHIP BLOCK is working and censors a
broadcast, "V-CHIP HAS BEEN ACTIVATED."
displays.
Press ENTER while the V-CHIP is working
and then the secret number setting menu
displays.
Enter your 4-digit secret number with 0 - 9.
At this time V-CHIP BLOCK temporarily
releases.
• You can reactivate the temporarily released V-CHIP
BLOCK as shown below.
Method 1:
Select "Status" setting from the Parental CTRL menu
to reactivate BLOCK. (See page 54.)
Method 2:
Select "V-Chip" setting ("MPAA", "TV Guidelines",
"Can. English Ratings" or "Can. French Ratings")
from the Parental CTRL to reactivate BLOCK. (See
pages 57 and 59.)
Method 3:
Switch off the TV power.
:~~.U)
• Performing any of the three above will activate the V-CHIP
BLOCK.
Press
./T
to select "V-Chip", and then press
ENTER.
Press
./T
to adjust the item to your desired
position. "Ii" indicates the item is blocked.
• The setting automatically enters "Block" for any
ratings below your selection.
• If Status is not set to "On", the configuration
settings will not work. (See page 54.)
Example
Press
./T
to select "Can. English Ratings",
and then press ENTER.
Press MENU to exit.
8
@-S9