Table of Contents
Advertisement
GAS TAPS
In the event of operating faults in the gas
taps, call the After Sales Service
Department.
BURNERS
They can be removed and washed with
soapy water only.
They will remain always perfect if
cleaned with products used for silver-
ware.
After cleaning or wash, check that burn-
er-caps and burner-heads are dry before
placing them in the respective hous-
ings.
It is very important to check that the
burner flame distributor and the cap has
been correctly positioned - failure to do
so can cause serious problems.
Note: To avoid damage to the electric
ignition do not use it when the burn-
ers are not in place.
C
F
Fig. 8.1
18
CORRECT REPLACEMENT OF THE
BURNERS
It is very important to check that the
burner flame distributor F and the cap C
has been correctly positioned (see figs.
8.1 - 8.2) - failure to do so can cause a
poor burner flame and/or damage to the
burner and hob.
Check that the electrode "S" (fig. 8.1) is
always clean to ensure trouble-free
sparking.
S
Fig. 8.2
Hide quick links:
Advertisement
Table of Contents
