Changing The Imager Behavior - Motorola RS507 Quick Reference Manual

Quick Reference Guide
Install the Trigger Swivel Assembly (See
3.
Replacement on page
Install the Comfort Pad (See
4.
Perform a cold boot (See
5.
Press and release the Scan Trigger to enable the manual triggering mode (this
6.
operation disables the default Triggerless mode).
NOTE When the Imager is used with the WT4090, Triggerless mode can also be
disabled from the WT4090.

Changing the Imager Behavior

The Imager operation can be configured by scanning custom bar code tables. The
following table provides examples of configurable Imager features. For more
information, refer to the RS507 Hands-Free Imager Product Reference Guide, p/n
72E-120802-01.
Feature
Beep on
reconnection
attempt.
Motion
sensing.
Proximity
sensing.
Proximity
distance.
Low battery
indication.
21).
Comfort Pad Replacement on page
Cold Boot on page
Description
When this parameter is enabled, the
Imager emits a low/high beep when
Bluetooth link is reconnected.
When this parameter is enabled, the
Imager automatically scans when motion
stops in front of the Imager and a bar code
is placed within the depth of field of the
Imager.
When this parameter is enabled, the
Imager automatically scans when sensing
proximity to an object and a bar code is
placed within the depth of field of the
Imager.
When using proximity sensing, you can set
proximity distance to Short, Mid or Long.
When this parameter is enabled, the
Imager flashes red every 15 seconds when
battery power is low.
Trigger Swivel Assembly
18).
21).
Default Setting
Disabled.
Enabled for
triggerless model.
Disabled for
triggered model.
Enabled for
triggerless model.
Disabled for
triggered model.
Long.
Disabled.
17