Change Trigger Position - Motorola RS507 Quick Reference Manual

Quick Reference Guide

Change Trigger Position

The Trigger Swivel Assembly of the Imager rotates to provide left-hand or
right-hand use.
From the bottom of the Imager, hold and pull the Comfort Pad out of the
1.
Imager.
Finger Strap
Note: It is not necessary
to remove the Finger
Strap from the Trigger
Swivel Assembly.
Trigger Swivel
Assembly
Determine whether the Imager is used on the right or left hand and rotate the
2.
Trigger Swivel Assembly.
CAUTION The Trigger Swivel Assembly only rotates 180° around the
Rotate the Trigger Swivel Assembly so that the Scan Trigger is positioned next
3.
to the thumb when the Imager is placed on the index and middle fingers.
Position the Comfort Pad onto the Imager.
4.
Press the Comfort Pad onto the Imager. When properly installed, the Comfort
5.
Pad "locks" into place.
Insert the Finger Strap into the Strap Buckle.
6.
bottom of the Imager. Do not rotate the Trigger Swivel Assembly
past the designed stops.
Comfort Pad
Strap Buckle
Trigger Swivel Assembly
Scan Trigger
7