Adding End Receiving Stations For Relayed Transmission - Panasonic DP-C406 Operating Instructions Manual

Adding End Receiving Stations for Relayed Transmission

You can add end receiving stations to the Address Book by the following procedure.
If broadcasting to multiple end receiving stations is required, use group dialling (See page 188).
The Function Parameter "140 LAN RLY XMT Request" (Fax/Email Settings > Fax Parameters) must have
been set to "Valid" to have a LAN Relayed transmission request pre-programmed in the Address Book. For
more operational details, refer to Fax/Email Settings in the Operating Instructions (For Function Parameters) of
provided CD-ROM.
For instructions on registration in the Address Book, refer to Address Book (see page 175).
You cannot use the address registered for Relayed transmission for Confidential communication, Sub-address
communication, and Password transmission. Register an address without a relayed station (See page 176).
1
Press the Function key.
2
Select "Fax/Email Settings".
3
Select "00 Address Book".
152
4
Select "01 Add Telephone Number".
5
Enter a fax number, and then select
"OK".
1
Select "Clear" to delete the fax number one
digit at a time.
For instructions on how to enter fax
numbers, refer to Manual Dialling (see
page 20).
2