Panasonic DP-C406 Operating Instructions Manual page 60

4
Enter a communication time, and then
select "OK".
Enter the time in the 24-hour format.
Ex: 18:00
If you make a mistake, select "Clear" to
delete entries one digit at a time.
5
If a password is required, enter the
password, and then select "OK".
If you have set the polling password in the
Function Parameter "26 Polling Password"
(Fax/Email Settings > Fax Parameters), the
password will appear on the display.
You can still change the password
temporarily by overwriting it with a new one.
6
Select a destination.
Refer to Entering a Destination (see page
20).
60
1 2
1 2
7
Press the Start key.
Polling starts when the pre-programmed time
is reached.
The programmed deferred communication
time can be modified.
For instructions on how to modify the
communication time, refer to Editing
Communication Reservations (see page
165).
If you need to delete a reserved
communication file, or cancel a time-
controlled communication, refer to Deleting
a Communication Reservation File (see
page 167).