Connecting The Fm And Am Antennas - JVC RX-7032VSL Instructions Manual

Connecting the FM and AM Antennas

FM Antenna Connections
A
N N
T E
A N
A
7 5
IA L
F M
A X
C O
ANTENNA
AM
Extend the supplied FM antenna
EXT
horizontally.
AM
LOOP
FM 75
Outdoor FM Antenna Cable
COAXIAL
(not supplied)
A. Using the Supplied FM Antenna
The FM antenna provided can be connected to the FM 75 Ω
COAXIAL terminal as temporary measure.
B. Using the Standard Type Connector (Not Supplied)
A standard type connector should be connected to the FM 75 Ω
COAXIAL terminal.
Note:
If reception is poor, connect the outdoor FM antenna (not supplied).
Before attaching a 75 Ω coaxial cable with a standard-type connector
(IEC or DIN 45325), disconnect the supplied FM antenna.
A
N N
T E
A N
B
7 5
IA L
F M
A X
C O
FM Antenna (supplied)
AM Antenna Connections
ANTENNA
AM
EXT
AM AM Loop Antenna
LOOP
(supplied)
Snap the tabs on the loop into the slots
of the base to assemble the AM loop.
FM 75
COAXIAL
1 2
Outdoor single vinyl-covered wire (not supplied)
Notes:
• If the AM loop antenna wire is covered with vinyl, remove
the vinyl by twisting it as illustrated.
• Make sure the antenna conductors do not touch any
other terminals, connecting cords and power cord. This
could cause poor reception.
• If reception is poor, connect an outdoor single vinyl-covered wire
(not supplied) to the AM EXT terminal. (Keep the AM loop antenna
connected.)
Turn the loop until you have the
best reception.
3
8