Sanyo AVC-100 Installation And Operation Manual page 16

ABOUT DISCS (2)
■ About copy protected CDs (copy control CD)
Use CDs that conform to CD Disc standard such as those with the CD logo
label.
Using a CD with a copy protected function configuration whose purpose was to prevent computer aided
reproduction may not playback normally. This is not due to a malfunction of the unit but rather to a
phenomenon that occurs due to the lack of conformity of copy protected CDs (copy control CD) to CD
standards. Should problems occur with the playback of copy protected CDs (copy control CD), consult the
place of purchase.
ABOUT REGION NUMBERS
The world is divided in 6 regions with corresponding region numbers for DVD software. This is to enable DVD
players to playback only DVD software with corresponding region numbers. This unit will not playback any DVD
video disc whose region number that does not correspond with the unit.
Hint
¡Discs whose region number is "ALL" can be played back by DVD players with any region number regardless
of the region.
¡Discs whose region number is not indicated has a region number even though it is not shown. Contrary to
discs that can only be played back using only DVD players with corresponding region numbers, there is a
possibility that discs with no indicated region number may be played back using any DVD player regardless
of the region.
25
HOW TO HANDLE DISCS
mark printed on its
¡Try not to touch the recorded surface of discs when holding
them.
¡Adhere paper or seals to the printed or recorded surface of
the disc in a way so as not to scratch the disc.
¡Do not use discs with dried glue from peeled off cellophane
tape or labels. The discs may not be retractable resulting in
damage to the unit.
¡The discs are rotated at a high speed. Do not use cracked or
warped discs.
¡To prevent warping, store in a case away from direct sunlight.
Do not place them on the seat or dashboard in vehicles under
direct sunlight especially during the summer months when
temperatures rise significantly.
¡Prior to use, gently wipe away any dirt, dust or fingerprints
from the recorded surface of the disc using a soft cloth from
the center of the disc towards the edges.
¡Do not use a record spray or an antistatic agent. Also, discs
may get damaged by benzene, thinner or other volatile
substance. Do not use these.
Printed surface
Thinner
Record Benzene
cleaner
26