Mitsubishi Electric Jet Towel JT-SB116JH-G-NA Installation Manual page 2

Safety Precautions
A warn
i
n
g
ll,T:T?Hj':"T3;:xilxi:*;;;''"'s
personar
Electrical
wiring work should
be
done by
a
certified
orofessional in conformance with the technical
standards
for the equipment or official standards.
Incorrect wrring can cause
electric shocks and fires.
This hand
dryer must
have
its
own independent
branch
circuit using
AWG
#12 or #14 copper wire.
The
circuit should
be
equipped
with
a Ground Faull
Interrupter and
a
'120
Vac, 20 amp
circuit
breaker
for
AWG
#12wire,
or a120 Vac, 15 amp
circuit
breaker
for
AWG
#14 wire.
Be
sure
to
install a
ground-fault circuit
interrupter.
Not doing
so may result in electrjc shocks.
A means
for disconnection
must
be
incorporated
in
the fixed
wiring in accordance
with
the
wiring
rures.
o
P rohibited
.
Do
not install in locations where salt damage may
occur, 0r where
corrosive,
neutral,
or reductive
gases are present.
This
may cause
malfunctions.
.
Do
not scratch, damage, process,
excessively
bend, pull, twist or
bundle the power
cable, and
do not
place heavy objects onto it or
trap
it.
Doing so may
damage
the power cable, causing
f
tres
or
electric shocks.
v
Follow
instructions
Do not attempt any disassembly
or modification
of
the unit
that is not expressly stated in
this
manuat.
Doing so may result in fires, electric shocks
or injuries.
^fR.
t flrJ I
.v
Do not
disassemble
Do not use in a
hot
location such as a
shower
room, where condensation may
form
on
the unit,
or where water may splash directly onto the unit.
This
mav cause
electric shocks
or malfunctions.
ACaution
The following may lead
to injury or damage to
property
if
the unit is handled incorrectly.
.
Install securely in a
location
strong
enough
to
support the weight of
the unit.
Inluries may
be
caused if
the unit
falls
off the wall
.
Wear gloves when installing the unit.
Not doing
so may result in injuries
.
Do
not install when
the
product (power cable)
is
electrified.
Doing so may result in electric
shocks.
.
-2-