Mitsubishi Electric Jet Towel JT-SB116JH-G-NA Installation Manual page 9

Installation (Continued)
l.Screw the power cable to the terminal block.
.
Prooer toroue is 11 lbf in(1.2N'm)
2.Check that the power cable is securely fixed
to the terminal block.
3.Screw the green striped bonding wire to the
terminal
base.
.
Proper torque is
1
1
lbf in(1.2N
m)
Green
striped bonding
wire
Power cable
Green striped
bonding
wire
Terminal base
1.Run
the power cable through the rubber
bushing, and attach the rubber bushing to
the terminal cover.
2.Attach the terminal cover to the main unit
using the terminal cover mounting screw.
3.Move the power cable to the left side of the
terminal cover.
4.Check that the power cable and wires are
not pinched anywhere.
Terminal
block
Terminal cover
mounting screw
\
Rubber
bushing
Terminal cover
-9-