Toshiba e-STUDIO203 Service Handbook page 15

y Density control ..................... Automatic density mode and manual density mode selectable in 7
y Weight.................................. Approximately 32 kg (70.55 lb.) (excluding the developer material and
y Power requirements............. AC 110 V / 13.2 A, 115 V or 127 V / 12 A
* The acceptable value of each voltage is ±10%.
y Power consumption ............. 1.5 kW or less (100 V series)
* The electric power is supplied to the ADF and PFU through the equipment.
y Total counter ........................ Electronical counter
y Dimensions of the equipment
.................................................. W 600 x D 643 x H 462.5 (mm): See the figure below
December 2005 © TOSHIBA TEC
steps
toner)
220-240 V or 240 V / 8 A (50/60 Hz)
1.6 kW or less (200 V series)
H
Fig. 1-1
e-STUDIO163/203 SPECIFICATIONS / ACCESSORIES / OPTIONS / SUPPLIES
1 - 3
06/04
D
W
1