Repair Guide; Precautions And Suggestions For Disassembly And Reassembly Of Main Body - Hitachi H 25PV Technical Data And Service Manual

Demolition hammer

Hide thumbs Also See for H 25PV:

Table of Contents

9. REPAIR GUIDE

The numbers in [Bold] correspond to the item numbers in the Parts List and exploded assembly diagrams.

9-1-1. Disassembly

Retainer disassembly

Pull the Grip [2] fully in the arrow direction as shown in Fig. 9 and remove the Front Cap [1] (since the Front

Cap [1] is made of rubber and engaged firmly with the Cylinder [24], pull it strongly to remove). This allows

Grip [2] to be separated from the Cylinder [24].

Remove the Stopper Ring [3] by means of a snap ring remover, then the Ball Holder [4], two Steel Balls D7.0

[23], Retainer Spring [5] and Lock Sleeve [6] can be removed from the Cylinder [24]. Remove Ring (A) [7] by

means of a snap ring remover, then the Cylinder Case Cover [8] can be removed from the Cylinder Case [9].

Stopper ring

Cylinder

Ball holder

Grip

Front cap

Steel ball D7.0 (2 pcs.)

Retainer spring

Fig. 9

Cylinder case

Lock sleeve

Ring (A)

Cylinder case cover

Fig. 10

--- 11 ---

Table of Contents