Call Forwarding; Using Variable Call Forwarding - Siemens HiPath 3000 Operating Instructions Manual

Step by Step
or

Call Forwarding

Using Variable Call Forwarding

You can immediately forward internal or external calls to
different internal or external telephones (destinations).
(External destinations require special configuration in
the system).
Special features must be taken into consider-
ation if your telephone operates with HiPath
AllServe (system networking via PC network)
Æ page 53!
Lift the handset.
Enter the code.
or Enter the line type you wish to use:
1 = all calls, 2 = external calls only, 3 = internal calls
only
Enter the destination number (without the external
code).
Deactivating call forwarding:
Lift the handset.
Enter the code.
When call forwarding is active, a sp ecial dial tone
sounds when you lift the handset.
If DID DTMF is active (contact System Support),
you can also forward calls to this destination.
Destinations: fax = 870, DID = 871 ,
fax DID = 872.
Call Forwarding
33