Controlling Relays; Radio Paging (Not For U.s.) - Siemens HiPath 3000 Operating Instructions Manual

Step by Step
or

Controlling Relays

If this feature is configured (contact System Supp or t),
you can turn up to four relays on an off to control differ-
ent facilities (such as a d oor opener).
Depending on how they are programmed, you can
switch the relays on and off or switch them on and have
them switched off automatically after a timeout.
Special features must be taken into consider-
ation if your telephone operates with HiPath
AllServe (system networking via PC network)
Æ page 56!
Lift the handset.
Enter the code for "off" or "on".
... Enter the relay.

Radio Paging (Not for U.S.)

If paging equipment is connected to your system (con-
tact System Support), you can contact people via their
pocket receivers.
The pocket receiver indicates to the p erson you are
looking for that someone is trying to get in touch. The
person you page can then go to the nearest telephone
and call you.
The operating proced ures differ according to the type of
radio paging equip ment connected (simple or enhanced
paging equipment).
Simple Paging Equipment
Paging:
To be paged, you must have activated a call ringing
group Æ page 50, call forwarding Æ page 33, or call re-
direction (service technician) to the internal station
number of your paging equipment.
A call request is then signaled automatically.
Using Other Functions
45