Trunk Flash; Associated Dialing/Dialing Aid - Siemens HiPath 3000 Operating Instructions Manual

Making Calls
Step by Step

Trunk Flash

To activate ISDN-type services and features through the
network carrier 's analog trunks or those of other com-
munications p latforms (such as "consultation hold"), you
must send a signal to the trunks before dialing the ser-
vice code or telephone number.
Precondition: You have set up an external connection
via an analog line.
Press the key. LED flashes. Enter the code.
Consultation
Enter the service code and/or telephone numb er.

Associated Dialing/Dialing Aid

If this function has been configured (contact System
Support), you can use your telephone as a dialing aid for
other telephones.
Lift the handset.
Enter the code.
Enter the internal station number of the party for whom
you want to dial.
Enter the number you wish to dial (external number
with external code).
19