Wearing The Ps-100 - Epson PS-100 User Manual

Wearing the PS-100

When wearing the product, make sure it does not touch the ulna bone on your wrist.
Note:
The Pulsense band needs to be worn snugly around the wrist to collect more accurate heart rate data.
This may cause a slight impression on the wrist. Adjust the band for the comfort and performance you
choose.
1
Measure the circumference of your wrist closely at the position indicated in the illustration
without touching the ulna bone.
2
Check the hole numbers from the length around the arm using table below. The hole
number is stamped in the back of band. The PS-100 S/M size has S1 to S9, The PS-100 M/L
size has L1 to L11.
3
Unfasten the buckle of the wristband as shown below.
Ulna bone
Set up and basic operation • 15