Airplane Mode - Epson PS-100 User Manual

Airplane mode

Wireless communication must be turned OFF during a flight. Set the product to Airplane Mode before take-
off.
When transporting the product it is recommend that you use this mode.
1
Remove the product from your wrist and repeatedly tap the face of the product as shown
below.
! Important
If you tap the PS-100 continuously as shown above while the device is connected to the charging cradle,
the pairing settings will be deleted.
The device will not go into airplane mode while measuring heart rate on your wrist; remove the product
before tapping as above.
2
When the product is successfully set to Airplane Mode, the LEDs will light up as shown below.
Note:
・
To check if the product is in Airplane Mode, tap the device and confirm the LED pattern is displayed:
・
While in Airplane Mode, heart rate measurement and wireless communication are disabled. However
calories burned, steps, and distance will continue to be calculated by the accelerometer.
Using your PS-100 • 26