Epson PS-100 User Manual page 19

Pairing issues
When using the product for the first time, check the following:
1. Attach the PS-100 to the cradle to wake the PS-100 from battery protection mode.
2. Enable Bluetooth
3. Check smart device compatibility: epson.com/PSdevices
4. Ensure your smart device is connected to the Internet.
5. Remove any other product from the area that could interfere with the Bluetooth
If pairing is lost or the PS-100 has been paired with another smart device, check the following:
1. The PS-100 may already be un-paired.
Put the PS-100 into the cradle and tap it until you see the blue LED s flash back and forth twice.
2. The PS-100 already been deleted from PULSENSE View.
3. The PS-100 already been deleted in the Bluetooth® settings of your smart device.
4. Make sure Bluetooth
5. Check smart device compatibility:epson.com/PSdevices
6. Ensure your smart device is connected to the Internet.
7. Remove any other product that could interfere with the Bluetooth
®
communication on your smart device.
®
communication been enabled on your smart device.
®
communication.
®
communication
Set up and basic operation • 19