Configuring the SV9100
The SV9100 should have an IP address assigned to the CCPU or IPLE card that is connected to the
st
network. A TCP Port has to be assigned to the 1
Party CTI driver to connect to, the recommended
port is 8282.
Assign the port in Wizards / Advanced Items / CTI / CTI LAN Port Setup (PRG 10-20 Dev9.) Set the
st
1
Party CTI TCP Port to 8282.
st
A license is required for each 1
Party CTI client that will be concurrently used (BE114078). You can
st
use 256 1
party CTI clients when the 60 day license is running.